The MFA LS-3700 reusable half masks are designed to be used with an approved MFA filter and filter system. These products, which are available in two sizes (S/M and L/XL), meet the requirements of EN 140:1998+AC:1999 reusable half masks. The LS-3700 safety masks have an MFA bayonet system for connec..
The flexible encapsulated packet filters MFA, mod. 1003 P3 R are specially designed for easy use against solid and liquid particles.Connection type: Bayonet; Excellent filtration efficiency over a long period of time; Lower profile and light weight; Optimal comfort; Does not obstruct the field of vi..
It is a lightweight, aesthetic and easy-to-use cartridge filter designed to protect users from hazardous vapors with a boiling point >65ºC, organic vapors, inorganic and acid gases, ammonia and derivatives.Connection type: Bayonet; Excellent filtration efficiency over a long period of time; Lower..
The replaceable filter (pre-filter) is designed to provide additional protection and increase the service life of the main replaceable MFA filter for a half mask from the effects of aerosols (dust, smoke, fog).Fastens with FH70 holder.In accordance with EN143: 2021..
Nitrile glove AQL 1.5- Disposable and ambidextrous- Powder-free, chlorinated- Thickness 0.12 mm- With exterior smooth finish- Excellent comfort, sensitivity and dexterity- 100 piece pack- Color: green- Sizes: M, L, XLEN ISO 374-1:2016, Type B: JKPT; EN ISO 374-5:2016 ..
Line: TouringUpper: Full Grain Drummed leather HydrotechLining: 3D Air circulation 320 gr.Removable insole: BlowfitSole: PU Dual-Density SRC passedToe cap: C.T.C. - Composite Toe CapAntiperforation: ZERO (k) ANTIPERFORATIONSize: 36-48Weight: 570 grEN ISO 20345:2011 S3 SRC..
• Lightweight• Adjustable arms• Polycarbonate lens (PC lens)• Soft nose bridge• Complete with spec cord ZZ0010 clear• Conform to EN166:• Optical Class:1• F T - (Low impact energy at extreme temperatures)• 2C-1.2 - UV Filter..
This single leg shock absorbing lanyard is an industry standard, and usually the minimum equipment issued / required with a harness for anyone working at height. We use 37kN polyester webbing to manufacture this product which helps give the product a longer life. This lanyard should be used wh..
Work positioning (Restraint) BeltAccredited to: EN 358:1999Weight: 0.7kgMaterial: 45mm water repellent polyesterFittings: High tensile steel alloy- 2 x side D rings- Padded back supportThe RGB2 work positioning / twin D restraint belt is..
Front & Rear D HarnessThis versatile, lightweight front and rear D harness is fitted with rear and chest mounted attachment points that extend its working capability. The RGH2 can be used in vertical fall protection operations and where restraint is needed in either vertical or horizontal planes.Acc..